NLT Model n=1 Checker

Pilot Run Mounting Data Confirmation System

Meets standard board area, M (330mm x 250mm), L (510mm x 380mm) and LL (510mm x 460mm). Customized requirement accepted.

Automatic Impedance Measurement:

Turret moves around automatically and measures targeted RLC components, compare against stored standard data, then reports correct, incorrect, or missing. As measured RLC data of golden board are stored as master value, even component mounted board is to be tested to verify correct components are mounted.

Visual Inspection Supported:

Other than RLC components are to be verified by ccd camera for each device, by displaying orientation mark or printed characters, manual inspection and judgment would be easily made.

TPG（Test Program Generator）

Program automatic generation software. Generated data would be for Kind of Component (RLC), Location, Part Code, Mounted X/Y Coordinates, Size, Height, Angle, Constant, Lower Limit / Upper Limit, Operation Flag, Printed Data and Test Mode.

Other Software Function:

Other useful functions include:
Part Height Search, Work Offset Acquisition, Manual Robot Movement, Data Log, Test TACT Display, Video Screen Rotation, Check Function by Video Screen Confirmation Mode, and others.

General	Test Board Area – M, L and LL Component Maximum Height – 13.9mm from board surface Test Time – 2 second / component Test Step – 10,000 maximum
Impedance Measurement	Device Type – 2 terminal R, L, C chip component, Chip module resistor Part Size – 0603, 1005, 1608, 2125, 3216 (3225), 4532, 5025 Orientation – 0, 90, 180 and 270 degrees Range - R: 0.01Ω to 199.99MΩ, L: 1.6uH to 199.99kH, C: 0.94pF to 199.99mF Measurement Voltage – 1Vp-p and 50mVp-p
Visual Inspection	Display Area – 6mm x 4 mm (461 dots / horizontal, 307 dots / vertical Displayed Check Function – Size, Mounted Angle, Printed Characters, 1 pin orientation, Cathode orientation, Missing part)

 

• • 
  • 
  • 
  • 
  • 
  • 
  • 
• • 
  •